Selection of certified construction joinery for controlled crossings
Recently, it is discussed what can and cannot be used as elements for locking doors with a specific resistance to burglary, covered by the access control system.This resistance was defined in the PN-EN 1627 door, windows, cover walls, bars and blinds.Burglary resistance.Requirements and classification.
Electricals, jumpers, bolts, electro -electroigles are proposed.It is also possible to use locks as the only security.If the locks are to be used, how many of them should be?One, two or maybe one multi -point castle?It is known that if a carpentry with a specific burglary resistance was tested in the certification process together with specific equipment, e.g..a castle of the appropriate class, it is not possible to use a different class lock or make any modifications to this product, e.g..by equipping it with jumpers or solemates.
Despite the difficulties mentioned, however, access control systems are widely used.This is dictated by the safety reasons and the convenience of using buildings.So how do you do when for safety reasons it is necessary to use a certified door?It is not difficult, but a few rules should be warned.
Remembering the golden principle of protection of objects, namely that time is the most important, you need to choose construction protection, including mechanical, wherever access control is needed.The door referred to above must be examined together with the mechanical elements, which include locks.It is therefore therefore an indisputable rule to choose a product tested by an accredited certification unit.Thanks to this, the product will have built adequate mechanical protection.In the PN-EN 1627 standard, it is determined what equipment class should be used in order to meet the minimum requirements for building protection of the appropriate class.
Another compulsory element of the door equipment specified in the PN-EN 1627 standard are certified fittings, such as tympanic inserts, door discs and locks.
Pursuant to PN-EN 1627 in certified doors, mechanical protection, such as jumpers, solepatods, electroxios, and any other fittings except mentioned in the standard.Of course, you can use the access control system for the door of the appropriate class, equipped with a lock or locks that meet the requirements specified in the PN-EN 1627 standard, as well as in the tongue, but such a solution requires locking the door through both the locks and the jumper.Opening and closing with a door card, which is also closed to locks with mechanical keys, seems not very comfortable.How to solve this problem? It's easy.Certified doors should be used, which are factory adapted to cooperate with the access control system.This solution gives us confidence that the door has been tested in terms of compliance with PN-EN 1627 together with factory equipment.
Certified doors are available on the market that can cooperate with both the access systems of various manufacturers (because they are factory equipped with appropriate electrical or electromotive locks), as well as with burglary and attack signaling systems (because they are factory equipped with opening sensors that meet the requirements for third degreesecurity).This solution is not only convenient, but also safe, because the alarm will turn on not after opening the door, but much earlier, already when trying to break through penetration, in accordance with PN-EN 50131-1 alarm systems.Burglary and assault signaling systems.Cz.7: Guidelines for use.This requirement must apply to the third and fourth degree of security.
You should carefully choose a construction joinery with adequate fire tightness and fire insulation and.You should offer ready certified doors that will be characterized by adequate fire resistance.
Let's not forget that the door on escape routes must guarantee the freedom to pass in the conditions prevailing during the fire.Also in this case, the solution is to use factory doors adapted to cooperation with access control systems.Such doors will be convenient to use and allow safe evacuation using door handles or levers, which are used to mechanically open the door, for which the key is not used and in which the fire signaling system does not control the closure.It is possible to factory adaptation of the door to both one -sided and double -sided transition control.
What should you do if the door with adequate burglary and fire resistance is already installed and we want to use the access control system?The latest solutions such as inserts and programmable keys (key access control) can be used.This solution will ensure the convenience of use, which gives the access control system, and at the same time maintaining a very high level of mechanical protection thanks to the use of cylinders in the insert.In addition, it gives the possibility of grouping transitions in the general key system, both in electronic and mechanical versions.This system is constantly expanded and, apart from the so far known solution consisting in downloading data entitling to access from the wall or mobile programmer, there are solutions using Bluetooth and IP links.The last two methods use a regular smartphone to download access data.In the IP method, data from the system and from the database is mentioned in real time, which is why the level of security as in high level of security access control systems is preserved.
Sławomir Goździeckanergo-Security Serwis-Mail: Slawomir.Gozdziecki@ESS24.pl
