How to properly install an external door

By drzwioknarzeszow09/03/2023468 Views

Posted on:Wed, Apr 15, 2020 07:41 2020-04-15T07:41:00.000Author:External material

SHARE ON: SHARE ON:

Lifestyle Exterior doors are one of the most important elements of home furnishings. Therefore, when building or renovating a house, you should pay special attention to whether the installation of external doors was carried out correctly. Only when the assembly of the door is flawless, will it fulfill its basic function, which is tightness and proper operation for many years. Below are the individual steps that will help in the efficient installation of external doors.

Preparation of the opening for door installation

Proper preparation of the opening for door installation should include, above all, a very precise comparison of the dimensions of the opening and the door. According to the Budogram service, the opening, according to the prevailing rules, should be higher than the purchased door frame by about 10 to 15 millimeters and wider by about 20 to 30 millimeters. Different door models have different dimensions, so first of all the opening itself should be prepared for a specific model. It is possible to purchase a door higher than our opening. Then it will be necessary to cut them from the bottom, but depending on the model purchased, it can be a real problem if we decided on a door with metal or steel reinforcement. The purchase of the entrance door itself should be preceded by a thorough check that the set contains all the necessary elements and that the leaf itself does not have any scratches, losses and deformations. for mounting the frame. The first fitting should be done with the door itself. After determining the appropriate dimensions, we can remove the sash and proceed to the proper assembly. The door frame itself is usually offered in several parts for self-assembly. The door frame should be positioned at the opening and fastened with wedges. Wedges will help us keep a straight line, so the next step is to verify the verticals and levels. If there is unevenness, it should be compensated by modifying the position of the wedge. At this stage, we can attach the door leaf again to check if the door works smoothly and without problems. The next point is the proper fixing of the frame with screws and dowels. The length of the screws should be at least 10 centimeters if we have a brick wall and at least 15 centimeters if the wall material is less durable, such as cellular concrete or hollow brick. The door frame should be very tight. Only the precise assembly of the door frame guarantees the longevity of the entrance door, regardless of the frequency of use. The next step is to seal the gap between the frame and the wall. Low-pressure foam will most often be used for this. The foam significantly increases its volume, so try to use it sparingly. The last step is to install the hinges.

Assembling the door leaf and adjusting the door

After solid installation of the external door frame, it's time to install the door leaf. As a rule, sashes do not have handles in the set, so they should be purchased separately. After installing the handle, we can hang the wings on the frame, enjoying the new front door.