News at Agro Show 2019 - Agricultural News Poland

This year, on September 19-22, at the International Agro Show in Bednary, an event organized by the Polish Chamber of Commerce for Agricultural Machines and Agricultural Equipment was presented by almost 730 exhibitors from the country and abroad.At stands occupying over 130 thousand.M2 interested parties could see the current offer of the agricultural industry.

This year, for the first time, visitors had the opportunity to observe machine shows while working with the stands.The shows were held in two blocks: in the first one presented precise agriculture on the example of sprayers, and in the second technique of cultivation in the simplified system.

As every year, for many companies, this exhibition was an opportunity to show their new products.The largest producers and dealers present on the Polish and European market presented their offer and new products, which we present below.

Fendt

For the first time in Poland, Fendt presented a new Fendt 900 Vario tractor.The new Fendt 900 Vario series with 5 models (930 Vario, (933 Vario, 936 Vario, 939 Vario and 942 Vario) includes a range of power from 296 to 415 hp).Thus, it fills the range between the Fendt 800 Vario and 1000 Vario models.Thanks to the new model, the top Fendt 942 Vario significantly exceeds the power of 400 HP.

The new generation 900 is characterized by the versatility of applications.This model has been constructed for heavy trains or requiring the use of PTOs.It is also suitable for transport at a speed of up to 60 km/h.Low curb weight, of only 11.7 tonnes, as well as the integrated pressure control system in VariGrip tires predestine this series to work wherever low pressure on the ground is desired in combination with high traffic force.

The modular design of the machine with or without a rear lift, rear ate, front PTOs, backward equipment and a large number of plumbing variants, hooks, is compatible with all popular tools connected to the tractor.

All models belonging to the new 900 series are equipped with a newly designed 6-cylinder MAN engine with a 9 l MAN, developed for the Fendt brand, with a VTG turbocharger with variable turbine geometry.

Fendt Ideal 7 is a newly developed cereal combine.Particular attention was paid to performance, high quality grain and straw, absolute reliability, simplicity and logic, as well as unique sensor technology ensuring the optimal setting of the machine.The presented model 7 is equipped with an Agco Power engine with 451 HP.Thanks to this, it achieves the highest capacity with effective fuel consumption.

Helix thoughts and separation system separates the grain without deterioration of straw quality.The longest single rotor on the market with an impressive 4.84 m long and diameter of 600 mm contributes to this.For optimal cleaning, a specially profiled return shelf was designed under the rotor.The cyclone cleaning system with powerful air flow and the longest sieves on the market ensure optimal grain cleanliness.

Another proposal of Fendt was the two -tailor Former 8055 Pro ripper with a working width of 7.20 - 8.00 m with central swath.The manufacturer guarantees high quality of work on the collection and long life.The rake propulsion system has a free maintenance of a free wheel and a sliding clutch for each rotor, which means that after disconnecting the PTOs, the rotors do not stop violently, but gradually and gently stop rotating.The rotor arms can be prepared for transport immediately after disconnecting the PTO to ensure reliable protection of the drive system.However, a simple drive system ensures long life.The swaths screen is automatically folded immediately after displacement of the rotor shoulder.It is of course also assembled automatically when moving to the transport position.Flow distributor, mounted as standard in some models, provides ideal synchronization when lifting the rotors.

Fendt presented the first Fendt Rotana 130 f Combi press.High thickening ability, precise cutting, quick wrapping and unloading as well as easy operation are the features of a new set.In Fendt rolling presses, excellent results are provided by an efficient 2.25 m width -free pickup.The use of a special segment geometry and an ideal angle of setting elongated fingers allowed to eliminate difficulties related to controlling the cam path.The pickup also contains fewer parts rotating and subject to wear, and thus works smoothly and is easy to service.Fendt rolling presses are equipped with various rotors that allow you to choose the system for a given application.The eighteen steel rollers of Powergrip ensure maximum density, exceptional performance and turning of bales regardless of working conditions.The mesh is provided by the Varionet system, which is completely compatible with all standard mesh widths.

Fendt Rotana 130 F Combi begins the wrapping process only when the bels are secured on the basis of a wrapping.Two battles and three endless stripes allow you to safely rotate bales based on wrapping.To ensure adequate wrapping any material, you can easily change the pre -stress of plastic foil by changing the gear ratio.You can choose from three variants of plastic film stress: 55%, 70% or 90%.

Joskin

At the Agro Show in Bednary Joskin, Modulo 11000 and 20,000 tannivation vehicles - Advantage series and Tornado3 spreader with new solutions and Scariflex company.

The Modulo Advantage 11,000 car is a simple machine adapted to tractors with a power of +/- 110 HP.It consists of a 11,000 -liter tribunal vehicle, with a 7.5 -meter -wide PedisLide Basic ramp, which is still mounted.The combination of such a combination ensures efficient fertilization while maintaining maximum simplicity.

Modulo XXL Advantage 20,000 L is the extension of the Advantage series product offer in the XXL version.Modulo2 with a capacity of 20,000 liters has large diameter wheels and a wide range of options.Is characterized by high maneuverability and simplicity to use.The manufacturer is counting on the market success that the Modulo Advantage version of 11,000 has achieved - Machine of the Year 2019.

Tornado3 Advantage 13 T is a spreader with a vertical adapter, whose load capacity is 13 tons.Its basic advantage is mainly construction assumptions.It is a spreader with a narrow reduced HLE steel gearbox on large diameter wheels.These features make it a compact structure, excellent stability, reduced mass and exceptional maneuverability.

Despite the specific structure.Depending on the model, at the height of the box between 1130 and 1570 mm, it can accommodate a load with a volume of 8.6 - 25.8 m³!

Tornado3 also appears in the version with horizontal rollers and includes 3 models.In this version, larger plates with a diameter of 1 040 mm were introduced, which guarantee even better material spread, over a greater distance, as well as better quality of its grinding. Joskin przeprojektował również skrzynie ładunkowe do TORNADO3 o wysokości 1,37 m (T5513/14V, T6013/16V i T6013/16BV).They have been standardized so that it could easily be converted to a vertical adapter scattering into its horizontal version.

In the Tornado3 spreader.This ensures better absorption and balancing of shocks.This is only part of the improvements in the new model.

The Scariflex Advantage SCARIFLEX 9.6 m loom.Thanks to working width 9.6 meters and working elements that complement each other perfectly - enabling simultaneous leveling, clevering of molehirts and loosening - the harrow can restore the full balance of green use in a large area in a record time.In addition, it is equipped with a 300 -liter pneumatic scoop.

Krukowiak

Krukowiak showed a plate and alpha mulch h 5.0 disc with a working width of 5 m, hydraulically folding for transport.It is a machine with a universal suspension system, i.e..on the front and rear tuz of the cooperating tractor.The rear suspension is Kat.II andIII, while on the front tuz kat.II.In addition, the suspension allows the machine to work on the front right after the so -called.arch - then the stresses that affect the tractor are significantly limited.The aggregate is built of a 400 mm front knife shaft - each of the shaft segments is secured by mounting with rubber shock absorbers.Behind the knife shaft is a plate section (FACH Plates, "wavy" with a diameter of 410 mm).In addition, the plate section has the possibility of hydraulically adjusting the depth of work.Working plates were mounted on SKF maintenance -free Piasts.The machine is planned for "solo" work or for cooperation with other dental aggregates hung on the rear tuz.It is mainly recommended for crushing a large amount of crop residues, uppers or remains of corn harvest, allowing more efficient use of dental aggregates for deep cultivation.This also ensures the destruction of the environment for pests living in the remains (especially for corn).Available versions are 4.0 h - 5.0 h (presented) and 6.0 hours.From the new year, the version on a rigid frame in a width of 3.0 m will also be available.

Lemken

Lemkenship in Rubin 10

You could see many machines at the Lemkena Stand at the Agro Show in Bednary.Among them, the novelty that the company showed, i.e. Rubin 10.Two machines were presented, a 6 -meter machine semi -saturated and a 3 m machine suspended.P from the previous generation ruby, i.e. Rubina 9, differs in that it has a larger and harder plate that has been enlarged from 62 cm to 64.5 cm.Comparing the size of the plate and its hardness 57 HRC, the life of new plates increased by about 30% compared to its predecessor.

In addition, Rubin 10 is equipped with a new plate suspension system.Cybants have been eliminated, keeping the side plate.Now the machine is on a new non-stop protection, and the handles are remembered in the frame, protected against carrying vibrations with a metal-gum element that does not require lubrication.The force returning the plate through special girgars is the same as the power.

In addition, the machine can be equipped in a very simple way to adjust the bullum of both front feeleous and rear equal.This adjustment involves running a scraper on special rules that with a special handle, thanks to which we can easily review the machine in a very simple way.

As for the new ruby 10, the new solution is to arrange the disks, i.e. there is no longer what was in the previous version of Rubin, i.e. all plates in the front row look at one of the sides, and in the other row in the other opposite.Now the plates have been divided.Half of the plates looks right, and half to the left in the first row, and in the second row antagonistically to avoid enduring the machine while working.Thanks to this plate laying.Lemken will present more new products at this year's Agrotechnical Fair in Hanover.

Amazone

Amazone - Brona and sprayers in a new setting

During the fair, Amazone presented the already known to farmers compact Catros+ 12003-2TS plate plate in a new working width of 12 m.The tool design uses larger, toothed plates with a diameter of 510 mm.Optionally, the manufacturer offers smooth plates with a diameter of 460 mm.The plates are individually secured on elastomers and embedded on maintenance -free hubs with sliding sealing rings.The presented arms was equipped with a ring shaft classified as the most universal equipment.

Another novelty shown in Bednary available in the German manufacturer's offer is the suspended UF 1602 sprayer compatible with the ISOBUS standard.The machine is equipped with a tank with a modernized shape and a capacity of 1600 l.The volume of spraying liquid in UF 1602 can be increased by integration with a FT 1001 tank suspended on the front tuz tractor with a capacity of 1000 liters.Continuous exchange of liquid between the front and rear tank both when filling the machine and spraying is provided by the FlowControl+ system.The sprayer equipment is supplemented with a new high -speed brush, facilitating aggregation with a tractor and folding transport wheels for movement of the sprayer.

During field shows, guests of the Agro Show fairs could watch the modernized version of the attached UX sprayers.The maximum turning angle has been improved in renovated machines, which is currently 28 degrees.In addition, a new torsion axle, fittings and cushioning choking the beam fluctuations were used.The model presented at the fair was equipped with a 5200 l tank and a 36 m wide beam.

Cranny

Korbanek - new products from the Arbos stable

The Korbanek company during the Agro-Show exhibition presented several machines produced by the Italian-Chinese ARBOS concern.One of the novelties is the pneumatic MSD seeder 2.0 Combi, which at the Bednary fair was integrated with the compact Tolmet Simply plate weapon (the machine is also available in the VERTICE version).The Simply harness is equipped with two rows of toothed plates with a diameter of 510 mm, which are embedded on maintenance -free hubs.The tool is available for the rear shaft.A packer shaft was installed in the presented aggregate.MSD seeder 2.0 is equipped with an electrically powered grain dispenser and a pneumatic seed transport system.An additional equipment is an electronically controlled system for installing technological paths.

Another novelty in the sales offer of the Korbanek company is the 6-row pneumatic Arbos 8130 seeder enabling precise sowing of corn, beet, rapeseed and other plants with the grasshopper of mineral fertilizers and microgranules.The machine is intended for smaller farms.Depending on your needs, the sowing sections (marked with the 8000-RS symbol) can be adapted to traditional or simplified sowing.By default, the sections are equipped with discs.The machine is equipped with a two-chamber mineral fertilizer tank with a total capacity of 430 l made of stainless steel and three 70-liter microgranules tanks.

The new product in the Korbanek company's offer is the 8-row pneumatic Arbos MS 8230 Pro point seeder equipped with hydraulically sliding sections (Easy Set).The machine can sow various seed species in 45 or 75 cm spacing.Like the 8130 model, the seeder is equipped with 8000-RS sections with different equipment configuration.The machine is equipped with an electronic monitoring controller for sowing seeds and a penetrating sown surface.

Maschio Gaspardo

Maschio - a modernized Gigante Pressure seeder and Mondiale 120 press in the HTU version

The main novelty of Maschio Gaspardo presented in Bednary was the modernized version of the Gigante Pressure cultivation and sire aggregate available in working widths 4, 5, 6 and 9 m.The machine is intended for direct sowing or in simplified technology.The seeder allows sowing of the seeds of various species and mineral fertilizers.The four -meter seeder is equipped with a 2390 l tank (1575 l part of the seeds, 815 l per fertilizer), while the others have a reservoir containing 3180 L (2080 l seeds, 1100 l fertilizer).The machine's design uses two sowing apparatus (one for distribution.The fan drive producing the air stream is obtained from the tractor hydraulics.On the other hand, seed and fertilizer distributors have an electric drive, which is controlled by a terminal working in ISOBUS technology to which the Genius Master system has been traveled.The seeder is equipped with an GPS antenna, which the system controlling the application of seeds and fertilizers uses to measure the aggregate speed.Thanks to the GPS system, it is possible to change the dosage of seeds and fertilizers based on GPS application maps.

The machine uses discs.The Redlic Pressure can be set up to 230 kg for one working element.The sowing depth is from 1 to 8 cm.The demand for the power of a 3-meter seeder is 135-180 HP, and the 6-meter 180-235 HP.

The new Maschio Gaspardo product presented in Bednary was the Mondiale 120 cylindrical comine press in the HTU version.It rolls bales with a diameter of 120 cm.The machine is equipped with a cutter with 25 knives, which even faster and more accurately crush the material prepared for pressing.The pickup with rubber undercoats is 2 m working width.There is a triangular roller pressing the collected material in front of the device.The ironing chamber consists of 19 rollers with the automatic lubrication system.The wrapping of bales in the ironing chamber is carried out only with a mesh.

Nowości na Agro Show 2019 - Wiadomości Rolnicze Polska

Valtra

Valtra-new models of the A Hi-Tech series tractors

At the Valtry stand, you could see tractors with PowerShift transmission introduced at the beginning of 2019, which were not available in earlier generations.These are Valtra A104 and A114 Hi-Tech tractors with maximum powers of 100 and 110 HP, respectively, equipped with 4-cylinder Agco Power engines.The Powershift Hitech 4 transmission available in these tractors offers four ranges with four PowerShift steps (16 × 16).Six gears are available in the main range of working speeds from 4 to 12 km/h.The transmission with 32 × 32 crawling gears is available, enabling speed below 100 meters per hour at 1400./min.The gearbox is operated with switches placed on an ergonomic lever.The Hishift function available in this transmission allows you to manually change gears without pressing the clutch pedal.In addition, an electrohydraulic reverse is available.A completely new dashboard was used in the tractors.The new element is the electronic JOYSTIK for the support of the front loader.The device can be retrofitted with buttons that support 3 and 4.

In the central part of the Valtra stand, the T174A (201km) tractor from Unlimited at Camso.Studio Unlimited performs unconventional modifications of Valtra tractors for individual customer orders.In addition to the diverse colors of the tractor, it offers M.in.Installation of auxiliary hydraulic systems, reversing cameras, instrumentation to work in the forest, central lubrication system and special lighting.The equipment installed in the Unlimited studio is covered by a full factory warranty.

Massey Ferguson

Massey-Ferguson-a wide range of tractors during the Agro-Show exhibition Massey-Ferguson showed the 7700 s series tractors.Among them was the 7719S model awarded with the title "Machine of the Year" during the last Sim 2019 in Paris, which is the largest tractor in this series.The maximum power of the tractor is 190 HP.It increases to 220 HP with the additional power power system turned on.The tractor engine meets very strict emission standards of Stage V thanks to the uncomplicated cleansing system.In the standard, the tractor is equipped with a continuously variable Dyna VT transmission.Together with the new model in the 7700S series, the manufacturer offers a 9-inch Terminal Datatronic 5 Terminal compatible with ISOBUS.The device offers functions used in the precision agriculture.

The 7715S model is also available in the 7700s series, which was also presented in Bednary.During the exhibition, the manufacturer announced a special price offer for this tractor (from PLN 318,900 net).MF 7715S is equipped with a Dyna-6 gear that offers 24 forward and 24 retrograde gears.This tractor meets the latest Stage V emission standards.

Visitors of the Massey-Ferguson stand on the AGRO SHOW trags could get acquainted with the premiere tractor of the 3700 series in the Al version (Alpine).The new series includes three models with a power of 75 HP (Massey Ferguson 3707 AL), 85 HP (Massey Ferguson 3708 AL) and 95 HP (Massey Ferguson 3709 AL).Tractors are dedicated primarily to mountain work, however, they will also be used in farms with low buildings or a hunting tractor in need.The tractors are equipped with the PowerShuttle 24 × 12 gear with an electrohydraulic Speedshift reverse, which allows you to change the eight gears in each of the three ranges.

Kuhn

KUHN - News of the French producer to the new product group that Kuhn presented at the Agro Show 2019 is the new Aurock 6000 R and RC aggregate with a working width of 6 m intended for simplified and conventional cultivation.The seeder is available in versions with one (R) and a double dispenser (RC).In the second version you can mix two species of plants in separate rows, while managing the sowing depth in an independent way.In the front part of the machine, the manufacturer placed two rows of plates opening a furrow for sowing seeds.Depending on the working conditions.Sowing seeds enable two -lane -shaped ranking in the V -shaped.The frame with sections mounted on it is connected to the rest of the machine via a hydraulically controlled joint.As a result.Seeds to Redlica are transported pneumatically.The machine is compatible with the ISOBUS standard.The manufacturer offers two drivers, including a new CCI 1200 device.The Aurock seeder may also have a GPS controlled control function.

Visitors to Kuh's stand could also get acquainted with the functioning of the new Vistaflow system, which allows you to automatically disable sowing in selected rows to create technological paths, on which fertilizer or sprayer will move on.Vistaflow valves allow you to determine any rhythms of technological paths and control the flow of seeds in each row.

Another novelty of the French manufacturer is the VARI-Master L plow available in the version from 4 to 6 bodies.The new model was created for working with new generation tractors, with a power from 200 to 300 HP.Plow Vari-Master L complements the place in the company's offer between the Master 153 model and the Master 183 model.

The Unia company presented four new products at the Agro Show in Bednary.

One of the novelties shown by the Unia company was the Heron 5027 attached sprayer, which compared to the previous model - Europe sprayers visually better look.The main optical change of the new machine concerns the improvement of the design of the tank.A new frame was designed, made of special steel.Thanks to it, the frame is relatively thin and is 8 mm thick, but it is durable.In addition, the frame is inclined at an angle of 6 degrees, which ensures better distribution of the center of gravity.

The ground clearance has been increased to 80 cm, and the sprayer's drawbar is absorbed with the possibility of configuration in 2 settings - in the position for the lower or upper hitch.Axle cushioning is pneumatic.In the option we get a torsion axis.In turn, the lack of a spring increases the ground clearance and the smoothness of the plants under the sprayer.

Checked beam constructions from 18 to 30 meters from the Europa XL model are planned.

The show version of the sprayer is equipped with a 5,000 main reservoir.liters, and 500 liters for clean water.Ultimately, it will be the largest model on this frame.The offer also includes a version with a 4,000 tank.liters with the same beams.The manufacturer reserves that this is not the final version of the sprayer and maybe a few more elements will be supplemented or it will change until the production is started.The machine will probably be available in spring 2020.

The Union also presented a semi -tilted version of the Ares XM aggregate with a chassis in front of the seasoning shaft.The chassis used between the embankment and the crop plate section means that the machine does not fall into resonance when working at unevenness at certain speeds and very shallow cultivation.The aggregate will be offered in working widths: 5, 6 and 8 meters, and in the future also 12 meters.

Working elements as standard are toothed plates with a diameter of 560 mm.Each plate works on a replaceable maintenance hub.The spacing between the first and second rows of working plates is 80 cm.The plates are mounted on a beam with a cross -section of 80 × 80 mm with triangular rubber cushioning.In the standard, after the second row of the plates, a graying government was placed.The arrangement and distribution of the aggregate is equipped with 2 cylinders in each section, which stabilizes the front row of plates and the entire aggregate system.

We set the depth of the work on the seasoning shaft.In the standard, we have a pipe shaft and a depth eye adjustment.Optionally, you can equip an aggregate with cylinders with the possibility of adjusting the operation with latches.The demand for power for the 6-meter aggregate is from 180 hp.The aggregate will be available next year.

Z kolei wersja zawieszana zębowego agregatu uprawowego AtlasII jest uzupełnieniem całej serii agregatów serii AtlasII w wersji półzawieszanej.The aggregate will be produced and offered in working widths 2.5 m and 3 and 4 meters.

The standard equipment is a front skid equating with screw adjustment protected with a spring, a string roller with a diameter of 400 mm, a double-row SX tooth section with 260 mm goose width and rear aigns.The complementary working element is a rear roller with a diameter of 400 mm with a toothed skid..In the standard version we have mechanical (screw) of the tooth section.In the option, instead of the front skid, we get lined traces behind the tractor wheels and hydraulic adjustment of the depth of operation with the possibility of setting the amount.

There are 3 cultivation sections on offer.SE teeth 3-in-line section with additional reinforcing spring.The basic tooth is a 32 mm wide tooth and a thickness of 12 mm with an additional strengthening spring with a thickness of 10 mm.The tooth undercut width is 175 mm.

The next section is section 4 with a SV tooth with a width of 40 mm and a thickness of 10 mm with a narrow double -sided rally.Complementing the 4-row section is the 2-row version with teeth working stiff but protected with screws.

The Union also showed a lime spreader and granulated fertilizers RCW HELIX 120 TD.RCW HELIX is the name of RCW spreaders adapted for sowing dusty lime with a 12 -meter -wide working beam.A 9 -meter beam will also be available.RCW 120 TD in the disc version has been on sale for some time and is a proven machine.In the version with a 9-meter beam, the fertilizer gearbox is enlarged to 13 cubic meters, so that the 27 tonal lime tank should be loaded twice into the spreader.

Lime can be ordered in a tanker or in bags type Big Bag.Loading is carried out through a pneumatic connector, which is equipped with a spreader.There are 2 islands for the even filling of the spreader tank inside.In the standard, we get a tight tarpaulin, left latch/ right to exclude half of the beam, which can be unfolded independently and lifted at home so as not to damage it.The dose is controlled by a superior computer.The latch on the beam serves to adjust the transverse layout of lime.

The machine is also adapted for sowing granulated fertilizers, as well as ordinary lime, but then we use a disc adapter that is standard (lime discs plus fertilizer discs).The beam is intended only for dusty lime.

The machine has passed the field tests this year.

John Deere

New 6M series tractors

John Deere has developed a completely new range of 6M series tractors with higher comfort and better performance, maneuverability and visibility compared to previous versions.The new series replaces the previous 6M, 6MC and 6RC series and includes new four -cylinder models with a capacity of 90 to 120 HP and a 2.4 m axis wheelbase.These tractors have smaller dimensions than the previously offered John Deere machines in this range of power, and the low -profiled mask ensures good visibility.

All the latest 6M series tractors are equipped with a newly designed cabin, which is much brighter and has a more modern look.Thanks to good calming, the noise level is 70 dB (A).The operator's comfort is also influenced by the fact that all important functions related to the service are on the completely redesigned panel on the right.

Thanks to the smaller wheelbase, the tractor is more maneuverable, which allows new four -cylinder models to turn back in a radius of only 4.35 m.Despite the small dimensions, tractors with a construction based on a full frame are characterized by a maximum permissible total weight of 10.45 tonnes, which means an unrivaled load capacity in this class, which is up to 4.7 tonnes.

The new 6M series is offered with three different gearbox options.The return and autoquad are PowerShift four -speed gears, and the Commandquad Plus transmission offers a fully automatic gear and range change without the use of the clutch.Innovative solutions were also introduced in the 6M series engines.

New Self -Professional Sprayers John Deere

John Deere has launched a new generation of self -propelled sprayers.The new models R4140i/R4150i have made changes to improve performance, precision, but also the safety and comfort of the operator.

The goal of the latest improvements was to increase the efficiency of the sprayer while ensuring the highest possible quality spraying and better operator's comfort.The construction of the new premium cabin offers a modern interface fully integrated with technologies such as, for example, the John Deere 4640 universal display mounted on the new armrest.The JDLink telematics module for wireless data exchange with a sprayer is available in a standard version with free activation for a period of five years.

In addition, a lighting package was improved to increase visibility at night both while working in the field and when filling the sprayer with plant protection products.Two levels of the new cabin specifications are also available depending on the customer's requirements.This is only part of the changes in new sprayers.

The production of John Deere R4140i/R4150i self -propelled sprayers will start in October this year, and they will be available from dealers at the beginning of 2020.

Zetor - new tractors

The biggest novelty of the Czech Zetor presented in Bednary is the Proxima Z-Line tractor in the style designed by the Italian studio Pininfarina.This is another tractor after the Major series "dressed" by the Italians.Proxima Z-Line is distinguished by a new mask, whose shape promotes better engine cooling.The redesigned cabin has a new descent roof with a window improving visibility to a front loader.Inside the cabin, new vents were used and the air conditioning performance has been improved.In the technical solutions used, the new proxima relative to the older version has changed little.In the Proxima series, the manufacturer offers three models with power in the range of 76 to 117 HP available in CL, GP and HS versions, which distinguish M.in.Various gears.

At the exhibition in Bednary for the first time the Czech producer presented the smallest tractor from his offer, which is Zetor Compax.The Compax series includes three models with a capacity of 25, 34 and 37 HP equipped with Yanmar engines.Small Zetor tractors are used in municipal work, sports areas and gardening.Depending on the version, the tractors are equipped with manual boxes of 6 × 2 or 12 × 12 or non -acidic hydrostatic gears.By default, Compax tractors are equipped with air conditioning and a joystick to operate the charger.

DEUTZ-FAHRDEUTZ-FAHR at this year's Agro Show presented a wide range of its proven machines, including tractors with a capacity of 35 to 330 HP.The largest model aroused a lot of interest - a 9340 tractor with 320 HP presented with additional equipment in the limited version of Warrior.

Authors of text and photos: AA, JS, WS